Trang chủ
Béc phun Bete Vietnam, Nozzle Bete Vietnam, 4 NCM40130W Teflon, bete vietnam
Mô tả
Bete Vietnam
Béc phun Bete Viet nam, Nozzle Bete Viet nam, đại lý phân phối Bete Vietnam
BENEFITS
- Precision volume sprays directly on the target
- Reduced waste and minimal overspray maintain a clean, safe environment
- Uniform and repeatable coverage improves product consistency
- Each nozzle produces a wide range of flow rates
Electric HydroPulse spray nozzles do not require a compressed air source and are capable of cycling on/off up to 150 cycles per second. These features afford the option of using high-frequency cycling known as Pulse Width Modulation (PWM) to vary the liquid spray flow rate at constant supply pressure with little change in spray performance by adjusting the duty cycle. When the spray cycles at a high enough frequency, coverage uniformity is maintained because the duration between pulses of spray is short enough to ensure there are no gaps in the spray coverage.
| Liquid inlet connection | 1/8″, NPT or BSPP |
| Maximum liquid flow rate | 3.8 LPM / 1.0 GPM |
| Maximum rated pressure | 20 bar / 300 PSI |
| Thermal insulation class | F (155°C / 311°F) |
| Power | 10.4W @ 24VDC |
| Electrical connector | DIN 11mm |
| Maximum cycle frequency | 50 cycles/sec |
| Nozzle construction | Stainless steel wetted components, Viton® (FKM) seals |
List code BETE tại Vietnam
| Model: 4 NCM40130W Teflon 4″ Male NPT , 120 Degree Full Cone Spray Pattern |
CW-100H |
| BJ08 | NC 03 |
| BJ10 | NC 16 |
| BJ30 | NC 40 |
| BJH-0.53 | NC 65 |
| BJH-1.60 | N 2 |
| BJH-1.80 | N 6 |
| CW-25F | WL 1/2 |
Xem thêm về Sản Phẩm TẠI ĐÂY !
Đánh giá (0)
Hãy là người đầu tiên nhận xét “Béc phun Bete Vietnam, Nozzle Bete Vietnam, 4 NCM40130W Teflon, bete vietnam”
Sản phẩm tương tự
Thiết bị khác
Đánh giá
Chưa có đánh giá nào.