Béc phun Bete Vietnam, Nozzle Bete Vietnam, 4 NCM40130W Teﬂon, bete vietnam

Category: Others Tags: bete 4 NCM40130W, BETE VIETNAM, đại lý phân phối Bete Vietnam, nhà phân phối bete vietnam, Nozzle Bete, Nozzle Bete Vietnam

BRAND: BETE Vietnam,

Description

Bete Vietnam

Béc phun Bete Viet nam, Nozzle Bete Viet nam, đại lý phân phối Bete Vietnam

bete vietnam

BENEFITS

Precision volume sprays directly on the target
Reduced waste and minimal overspray maintain a clean, safe environment
Uniform and repeatable coverage improves product consistency
Each nozzle produces a wide range of flow rates

Electric HydroPulse spray nozzles do not require a compressed air source and are capable of cycling on/off up to 150 cycles per second. These features afford the option of using high-frequency cycling known as Pulse Width Modulation (PWM) to vary the liquid spray flow rate at constant supply pressure with little change in spray performance by adjusting the duty cycle. When the spray cycles at a high enough frequency, coverage uniformity is maintained because the duration between pulses of spray is short enough to ensure there are no gaps in the spray coverage.

Liquid inlet connection	1/8″, NPT or BSPP
Maximum liquid flow rate	3.8 LPM / 1.0 GPM
Maximum rated pressure	20 bar / 300 PSI
Thermal insulation class	F (155°C / 311°F)
Power	10.4W @ 24VDC
Electrical connector	DIN 11mm
Maximum cycle frequency	50 cycles/sec
Nozzle construction	Stainless steel wetted components, Viton^® (FKM) seals

List code BETE tại Vietnam

Model: 4 NCM40130W Teﬂon 4″ Male NPT , 120 Degree Full Cone Spray Pattern	CW-100H
BJ08	NC 03
BJ10	NC 16
BJ30	NC 40
BJH-0.53	NC 65
BJH-1.60	N 2
BJH-1.80	N 6
CW-25F	WL 1/2