Cảm biến Raytek Vietnam RAYGPSSFL
Đại lý hãng RAYTEK tại Việt Nam, hãy liên hệ để có hỗ trợ tốt nhất!
LIST THIẾT BỊ Cảm biến Raytek Vietnam RAYGPSSFL :
GPS Series Sensing Heads, Cảm biến Raytek Vietnam |
|
Raytek RAYGPSSFL Standard Focus Infrared Temperature Sensor with Laser Sighting, 50:1 Optics | |
Raytek RAYGPSCFL Infrared Temperature Sensor, Close Focus, 35:1 | |
XXXGPSCERT | Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST, certified w/ GPC display monitor (must be ordered as a separate line item) |
ACCESSORIES | |
XXXGPSCB4 | Spare GPS Sensor Cable – 4 meter length |
XXXTXXACAP | Air purge collar |
XXXTXXACCA | Conduit adapter |
XXXTXXACPA | Pipe thread adaptor (Sighting Tubes listed below can be attached to this) |
XXXTXXACMN | Mounting nut (spare) |
XXXTXXACFB | Fixed bracket (spare) |
XXXTXXACAB | Adjustable bracket (spare) |
XXXTXXACSB | Swivel bracket |
XXXTXXACSV | Sighting viewer setup tool (for GPR & TX ) |
XXXTXXACRA | Right angle mirror (for targets at right angles to sensor axis) |
XXXTSTC12 | 30 cm (12″) sighting tube, ceramic (up to 1500°C) |
XXXTST12 | 30 cm (12″) sighting tube, stainless steel (up to 800°C) |
XXXTXXACAFA | Adjustable Furnace Wall Mounting Assembly |
XXXTXXACFA | Wall Mount Flange Assembly |
98982-1 | Replacment Laser Switch Box For GPS Sensor |
FLOW REGULATORS: FOR USE WITH COOLING/PURGING OPTIONS AND ACCESSORIES | |
XXXTXXWR | Water flow regulator (water cooling) |
XXXTXXAR | Air purging flow regulator assembly with air filter |
XXXTXXCAFR | Cooling air flow regulator (high capacity) |
GPC Series Monitor, Raytek Vietnam RAYGPSSFL | |
RAYGPC | GPC panel-mount meter with standard 5 VDC alarm outputs |
RAYGPCM | GPC panel-mount meter with 3 A mechanical alarm outputs |
GPC MONITOR ACCESSORIES | |
XXXGPSSRAC | 10 A/ 24 – 330 VAC Solid State Relay for use with 5Vdc alarm outputs from GPC monitor only |
XXXGPACFB | GPC mounting bracket for sub-panel mounting of monitor |
Raytek Marathon MM | |
RAYMM-LTS-CF1/SF1/SF2/SF3/VF1 | Low Temp: -40 to 800°C (-40 to 1472°F), 8 to 14 microns spectral response, 70:1 optical resolution |
RAYMM-MTS-CF1/SF1/SF2/SF3/VF1 | Medium Temp: 250 to 1100°C (482 to 2012°F), 3.9 micron spectral response, 70:1 optical resolution |
RAYMM-G5L-CF1/SF1/SF2/SF3/VF1 | Glass Surface: 250 to 1650°C (482 to 3002°F), 5.0 micron spectral response, 70:1 optical resolution |
RAYMM-G5H-CF1/SF1/SF2/SF3/VF1 | Glass Surface: 450 to 2250°C (842 to 4082°F), 5.0 micron spectral response, 70:1 optical resolution |
RAYMM-G7S-CF1/SF1/SF2/SF3/VF1 | Glass Surface: 300 to 900°C (572 to 1552°F), 7.9 micron spectral response, 100:1 optical resolution |
MM CABLE |
|
XXX2CCB4 | High-temp (200°C) 12 wire 12 pin conductor cable with connector, 4m (13 ft.) |
XXX2CCB8 | High-temp (200°C) 12 wire 12 pin conductor cable with connector, 8m (26 ft.) |
XXX2CCB15 | High-temp (200°C) 12 wire 12 pin conductor cable with connector, 15m (50 ft.) |
XXX2CCB30 | High-temp (200°C) 12 wire 12 pin conductor cable with connector, 30m (100 ft.) |
XXX2CCB60 | High-temp (200°C) 12 wire 12 pin conductor cable with connector, 60m (200 ft.) |
XXX2CLTCB4 | Low-Temp (85°C) 12 wire 12 pin conductor cable with connector, 4m (13ft.) |
XXX2CLTCB8 | Low-Temp (85°C) 12 wire 12 pin conductor cable with connector, 8m (26ft.) |
XXX2CLTCB15 | Low-Temp (85°C) 12 wire 12 pin conductor cable with connector, 15m (50 ft.) |
XXX2CLTCB30 | Low-Temp (85°C) 12 wire 12 pin conductor cable with connector, 30m (100 ft.) |
XXX2CLTCB60 | Low-Temp (85°C) 12 wire 12 pin conductor cable with connector, 60m (200ft.) |
An external terminal block is included with each cable. | |
CARBON ANODE BAKE FURNACE SOLUTION | |
CABFR1ACF1 | 4 Type of Cable (3, 4, 6, 10 meter) |
CABFR1BCF1 | 4 Type of Cable (3, 4, 6, 10 meter) |
INSTALLATION ACCESSORIES FOR CARBON ANODE BAKE FURNACE | |
CABINSTALL1 | Carbon Anode Bake Furnace Installation Kit. Stainless Steel hardware with quick disconnect, air purge, sight tube and 3m (10ft.) protection tube. For use with 3m fiber-optic cable. |
CABINSTALL2 | Carbon Anode Bake Furnace Installation Kit. Stainless Steel hardware with quick disconnect, air purge, sight tube and 4m (13ft.) protection tube. For use with 4m fiber-optic cable. |
CABINSTALL4 | Carbon Anode Bake Furnace Installation Kit. Stainless Steel hardware with quick disconnect, air purge, sight tube and 10m (30ft.) protection tube. For use with 3m fiber-optic cable. |
XXXFRFAWCKIT | Field installable, Electronics cooling platform |
SMART RS485 CONVERTERS: These RS-485 to RS-232 interface converters are recommended for use with all Raytek Software Packages |
|
XXXUSB485 | USB to RS232/422/485 converter |
SPARE PARTS | |
XXXFR1HCF1B | Replacement/Spare fiber-optic head |
XXXFR1CB3 | 3m (10ft.) FR1 fiber-optic cable |
XXXFR1CB4 | Replacement/Spare 4m (13ft.) fiber-optic cable |
XXXFR1CB6 | 6m (20ft.) FR1 fiber-optic cable |
XXXFR1CB10 | 10m (33ft.) FR1 fiber-optic cable |
BF1FRWINDOW | Sapphire protective Window mounted in Stainless Steel bezel |
Đánh giá
Chưa có đánh giá nào.