Trang chủ
Thiết bị hãng Raytek Vietnam RAYTX-S-LT0 | RAYTXXTJ3
Mô tả
Thiết bị hãng Raytek Vietnam RAYTX-S-LT0 | RAYTXXTJ3
Đại lý hãng RAYTEK tại Việt Nam, hãy liên hệ để có hỗ trợ tốt nhất!
BẢNG THIẾT BỊ RAYTEK
| RAYTX-S (Smart Series), Thiết bị hãng Raytek Vietnam | |
| RAYTX-S-LT | Low Temp: -18 to 500°C (0 to 932°F) / 8 to 14 microns, TXSLT default scaling is -18 to 500°C (0 to 932°F) and can be field set up to 0 to 1000°F), TXFLT |
| RAYTX-S-LT0 | Low Temp: 0 to 500°C / 8 to 14 microns, TXCLT output is fixed and scaled 0 to 500°C (For use with TXC units only) |
| RAYTX-S-MT | Medium Temp: 200 to 1000°C (392 to 1832°F) / 3.9 microns, TXSMT |
| RAYTX-S-HT | High Temp: 500 to 2000°C (932 to 3632°F) / 2.2 microns, TXSHT |
| RAYTX-S-G5 | Glass Surface: 250 to 1650°C (482 to 3002°F) / 5.0 microns, TXSG5 |
| RAYTX-S-P7 | Thin Film Plastics (Polyester & Teflon): 10 to 360°C (50 to 680°F) / 7.9 microns, TXSP7 |
FOCUS OPTION FOR RAYTX-S, Thiết bị hãng Raytek Vietnam |
|
| SF | Standard Focus, (33:1 D:S for all models except HT which has 60:1) |
| CF1 | Close Focus 1, (Not available for P7, consult factory for special G5 close focus) |
| CF2 | Close Focus 2, (Not available for P7, consult factory for special G5 close focus) |
| PSF | Plastic Fresnel Lens, Standard Focus, 15:1 D:S for LT models only |
| OPTION FOR RAYTX-S | |
| IS4 | Intrinsically-Safe Rating, for TXS models only EX II 2G Ex ib IIC T4 Gb (gases/vapors) EX II 2D Ex ibD IIIC T135°C Db (dusts) |
| IS4W | Intrinsically-Safe Rating for TXS including Water/Air Cooled Housing/Air Purge Collar EX II 2G Ex ib IIC T4 Gb (gases/vapors) EX II 2D Ex ibD IIIC T135°C Db (dusts) |
| IS5 | Intrinsically-Safe Rating, for TXS models only, PTB-approval EX II 2G Ex ib IIC T4 Gb (gases/vapors) EX II 2D Ex ibD IIIC T135°C Db (dusts) |
| IS5W | Intrinsically-Safe Rating for TXS including Water/Air Cooled housing/Air Purge Collar, Stainless Steel EX II 2G Ex ib IIC T4 Gb (gases/vapors) EX II 2D Ex ibD IIIC T135°C Db (dusts) |
| XXXTXCERT | Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item) |
| XXXTXACTWL | Amtir Protective Window for LT model |
| XXXTXACTWM | Sapphire Protective Window for MT model |
| XXXTXACTWH | Glass Protective Window for HT model |
| XXXTXACTWGP | Calcium Fluoride Protective Window for G5 and P7 models |
| XXXTXACTWLF1 | Plastic Foil Protective Window in stainless Steel frame – for use with Laser-sighted models (includes 10 spare foils) |
| XXXTWLF | 10 spare plastic foils for XXXTXACTWLF1 |
| XXXTXACTWLS | Stainless Steel Amtir Protective Window for LT model |
NOTE: Protective windows are shipped uninstalled from the factory. To signify “factory installed” window please add “I” to the end of the part number (e.g. XXXTXACTWL becomes XXXTXACTWLI) |
|
| XXXTXACRCK | Remote Communications Kit for Smart Model TXS, includes HART/RS232 adapter, cables & DataTemp Multidrop software. |
| XXXSYSPS | 24VDC power supply (100/240),1.3 amps |
| RAYGPC | Remote Panel Mount Display and Power Supply for XR Sensors |
| RAYGPCM | GPC panel-mount meter with 3 A mechanical alarm relay outputs, fully isolated electrical inputs and outputs, 110/220 VAC power |
| BFATXISSET | Required Complete ABB power supply, IS barrier and isolater set for Intrinsically safe TX sensors |
| XXXTXXACAP | Air purge collar |
| XXXTXXACCA | Conduit adapter |
| XXXTXXACPA | Pipe adapter (Sighting Tubes listed below can be attached to this) |
| XXXTXXACMN | Mounting nut (spare) |
| XXXTXXACFB | Fixed bracket (spare) |
| XXXTXXACAB | Adjustable bracket (spare) |
| XXXTXXACSB | Swivel bracket |
| XXXTXXACSV | Sighting viewer setup tool |
| XXXTXXACRA | Right angle mirror (for targets at right angles to sensor axis) |
| XXXTXXACAFA | Adjustable Furnace Wall Mounting Assembly |
| XXXTXXACFA | Wall Mount Flange Assembly |
| XXXTXXACAPS | Stainless Steel Air Purge Collar |
| THERMOJACKET: EXTRA RUGGED CAST METAL HOUSING FOR THERMAL, MECHANICAL, & ENVIRONMENTAL PROTECTION FOR MARATHON SENSORS, AND TX SENSORS. | |
| RAYTXXTJ3 | ThermoJacket housing for TX sensors |
THERMOJACKET ACCESSORIES |
|
| XXXTXXMF | Mounting Flange for ThermoJacket |
| XXXTXXMB | Adjustable mounting base for ThermoJacket |
| XXXTXXGTQ | Blast Gate Assembly with Quartz Window (HT model) |
| XXXTXXGTA | Blast Gate Assembly with Amtir Window (LT, MT, G5, P7 models) |
| XXXTXXAPA | Adjustable Pipe Adapter assembly |
| XXXTXXMST | Mounting flange for use with sighting tubes |
| XXXTSTC12 | 30 cm (12″) sighting tube, ceramic (up to 1500°C) |
| XXXTST12 | 30 cm (12″) sighting tube, stainless steel (up to 800°C) |
| BEESIGHTT | 30 cm (12″) sighting tube, carbon steel with 45 degree end cut and slotted weep hole at base |
| FLOW REGULATORS: FOR USE WITH COOLING/PURGING OPTIONS AND ACCESSORIES | |
| XXXTXXWR | Water flow regulator (water cooling) |
| XXXTXXAR | Air purging flow regulator assembly with air filter |
| XXXTXXCAFR | Cooling air flow regulator (high capacity) |
| THERMOJACKET & ACCESSORIES | |
| THERMOJACKET: EXTRA RUGGED CAST METAL HOUSING FOR THERMAL, MECHANICAL, & ENVIRONMENTAL PROTECTION FOR MARATHON SENSORS, AND TX SENSORS. | |
| RAYTXXTJ3 | ThermoJacket housing for TX sensors |
| RAYTXXTJ4 | ThermoJacket housing for Marathon MM Sensors |
| RAYTXXTJ5 | ThermoJacket housing for XR sensors |
THERMOJACKET ACCESSORIES |
|
| XXXTXXMF | Mounting Flange for ThermoJacket |
| XXXTXXMB | Adjustable mounting base for ThermoJacket |
| XXXTXXGTQ | Blast Gate Assembly with Quartz Window (HT model) |
| XXXTXXGTA | Blast Gate Assembly with Amtir Window (LT, MT, G5, P7 models) |
| XXXTXXAPA | Adjustable Pipe Adapter assembly |
| XXXTXXMST | Mounting flange for use with sighting tubes |
| XXXTSTC12 | 30 cm (12″) sighting tube, ceramic (up to 1500°C) |
| XXXTST12 | 30 cm (12″) sighting tube, stainless steel (up to 800°C) |
| BEESIGHTT | 30 cm (12″) sighting tube, carbon steel with 45 degree end cut and slotted weep hole at base |
| XXX2CFT | Focus Adjustment Tool, for use when MR1S sensors are installed in a Thermojacket. |
| BF2TJEXTENDER | ThermoJacket Extension flange for CCD camera accessories mounted on MR Sensor in ThermoJacket |
| BD3TJBACK | ThermoJacket Rear cover with Peep-sight used for sighting Marathon models without removal |
| XXXGTQHTW | Replacement Quartz Window for Blast Gate Assembly |
| JNTHDKIT | Conversion Kit to install TX into existing Thermo-Jacket |
| JNTORINGKIT | 5 complete O-ring sets for service of ThermoJackets |
| FLOW REGULATORS: FOR USE WITH COOLING/PURGING OPTIONS AND ACCESSORIES | |
| XXXTXXWR | Water flow regulator (water cooling) |
| XXXTXXAR | Air purging flow regulator assembly with air filter |
| XXXTXXCAFR | Cooling air flow regulator (high capacity) |
Đánh giá (0)
Hãy là người đầu tiên nhận xét “Thiết bị hãng Raytek Vietnam RAYTX-S-LT0 | RAYTXXTJ3”
Sản phẩm tương tự
Pressure and Temperature Measurement
Pressure and Temperature Measurement
Pressure and Temperature Measurement
Pressure and Temperature Measurement
Bộ gia nhiệt Watlow VF816A36XC VF81GA3GXC, Ceramic Fiber High Temperature Heater 380V 12500W
Pressure and Temperature Measurement
Súng đo nhiệt độ Raytek Vietnam RAYR3IPLUS, RAYR3IPLUSNBT2ML
Pressure and Temperature Measurement
Pressure and Temperature Measurement
Pressure and Temperature Measurement
Đánh giá
Chưa có đánh giá nào.