Trang chủ
Kho hàng Anh Nghi Sơn Tháng 12/2022
Mô tả
Kho hàng Anh Nghi Sơn Tháng 12/2022
| 100% USA Origin | MTS Sensor/Temposonics Vietnam | Replaced Code: RP5SA0450M02D601A100 |
| Temposonics® R-Series | ||
| Details: | ||
| RP5 -> Sensor Model -> Temposonics® R-Series V Profile | ||
| S -> Housing Style -> Magnet slider, joint at top (part no. 252182) (RP) | ||
| A -> Mechanical -> Standard | ||
| 0450 -> Stroke Length -> 450 mm | ||
| M -> Unit Of Measure -> Millimeters | ||
| 02 -> Analog Multi Magnet Quantity-> 2 Magnets | ||
| D60 -> Connection -> M16 Male Connector | ||
| 1 -> System -> Standard | ||
| A -> Output -> Current | ||
| 1 -> Function-> Position (1 or 2 magnets/outputs) | ||
| 0 -> Options -> Standard | ||
| 0 -> Output Range-> 0…10VDC or 4…20mA | ||
| Note: Recheck delivery time before order | ||
| RPS0450MD601A02 is obsoleted | ||
| 100% US/EU Origin | MOOG Vietnam | Code: B52555RK201K001 |
| Replacement Kit | ||
| 100% EU | Norgren Vietnam | Code: PCA/702050/M/50 |
| Origin | Description: Cylinder | |
| 100% EU | Norgren Vietnam | Code: PCA/702040/M/100 |
| Origin | Description: Cylinder | |
| 100% EU | Norgren Vietnam | Code: PCA/702050/M/40 |
| Origin | Description: Cylinder | |
| 100% Thailand Origin | Eurovent Vietnam | Model: LR 451/B |
| BLOWER | ||
| Complete with motor HASCON 11kW 2P 380/660V | ||
| Air Volume 180 cmm | ||
| ST Pressure 192.30 mmWg | ||
| Direct drive | ||
| – Backward impeller in steel | ||
| – Balance quality grades G 6.3 standardized in ISO 1940 | ||
| – Blower housing in steel | ||
| – Color : Green IL8489 | ||
| 100% Japan Origin | Showa Giken Vietnam | Model: CSP-2 100A×10K |
| Swivel Joint | ||
| 100% US/EU | Turck Vietnam | Type: TBEN-L4-16DIP |
| Origin | Compact Multiprotocol I/O Module for Ethernet | |
| 100% Germany Origin | Dold Vietnam | Model: UH5947.04PS/001/61 DC24V |
| SPEED MONITOR | ||
| 100% Germany Origin | Dold Vietnam | Model: UH5947.04PS/61 DC24V |
| SPEED MONITOR | ||
| 100% Germany Origin | Dold Vietnam | Model: IK8701.12 AC50HZ 230V |
| SWITCHING RELAY | ||
| 100% Germany Origin | Dold Vietnam | Model: BH9097.38 AC230V AC24A |
| MOTOR LOAD MONITOR | ||
| 100% USA Origin | Jenco Vietnam | Code: 6308PT |
| pH controller | ||
| 100% USA Origin | Jenco Vietnam | Code: IP-600-9TH |
| pH electrode | ||
| 100% Japan Origin | Miki Pulley Vietnam | Model: M3-E1-A-380/50 |
| Speed change drive | ||
| 100% USA Origin | Trans-Tek Vietnam | 0243-00000 |
| DCDT .75 OD +/-.50″ STROKE | ||
| Transducer series 240 | ||
| NOTE: An additional “0” to the end of the part number – 0243-00000. The 5th zero only reflects the core/magnet is included with the part. Same form, fit, and function as our old model # 0243-0000 | ||
| ( replace for old model 0243-0000) | ||
| 100% USA Origin | Trans-Tek Vietnam | 0243-00000 |
| DCDT .75 OD +/-.50″ STROKE | ||
| Transducer series 240 | ||
| NOTE: An additional “0” to the end of the part number – 0243-00000. The 5th zero only reflects the core/magnet is included with the part. Same form, fit, and function as our old model # 0243-0000 | ||
| ( replace for old model 0243-0000) | ||
| 100% Japan Origin | Unipulse Vietnam | Model: SCB-100N |
| Unipulse Loadcell | ||
| 100% Germany Origin | Dold Vietnam | Art. No.: 0063278 |
| Type: LG5925.48/900/61 DC24V | ||
| LIGHT CURTAIN CONTROLLER | ||
| 100% Czech republic Origin | Dinel Vietnam | Code: ULM-53N-10-G-I-G-M |
| ULM level meter | ||
| 100% Germany Origin | Honsberg (GHM) Vietnam | Code: HD1K-015GK010 |
| Flow Switch | ||
| Standard Construction | ||
| Nominal width: DN 15 – G ½ | ||
| Female thread | ||
| Connection material: Stainless steel | ||
| HD1K – Switching range H2O for horizontal inwards flow: 1,0 – 10 l/min | ||
| 100% Germany Origin | Honsberg (GHM) Vietnam | Code: FW1-020GM011 |
| Flow Switch | ||
| Nominal width: DN 20 – G ¾ | ||
| Connect type: Female thread | ||
| Connect material: Brass | ||
| Switching range H2O for horizontal inwards flow: 1 – 11 l/min | ||
| 100% EU/ Germany Origin | Balluff Vietnam | BSI0004 |
| BSI R11A0-XB-CXP360-S75G | ||
| Inclination sensors | ||
| 100% EU/ Hungary Origin | Balluff Vietnam | BIS00NZ |
| BIS M-191-02/A | ||
| HF data carriers (13.56 MHz) | ||
| 100% Japan Origin | Sanko Vietnam | Model: SK-2200-560-01channels |
| SK-2200 | ||
| Detecting width : 560mm | ||
| 01 channels | ||
| 100% Japan Origin | M-SYSTEM Vietnam | Model: W2VS-AAA-R2/N |
| CONVERTER | ||
| 100% USA | GE | Model : IC695PNS001 |
| Origin | Vietnam | Module |
| Note : recheck STOCK khi order | ||
| 100% USA | GE | Model : IC695PNS101 |
| Origin | Vietnam | Module |
| Note : recheck STOCK khi order | ||
| 100% US Origin | Mark-10 Vietnam | Model: MTT03C-50 |
| Cap Torque Gauges | ||
| 50 lbFin / 580 kgFmm / 570 Ncm | ||
| 100% USA Origin | Aii Vietnam | Model: PSR-11-55-HL |
| Anesthesia / Respiratory Oxygen Sensor | ||
| 100% USA Origin | Aii Vietnam | Model: PSR-11-917-MH |
| Respiratory Oxygen Sensor | ||
| 100% Japan Origin | Showa Giken Vietnam | Model: PM-3-25A |
| Joint | ||
| 100% Finland Origin | Vaisala Vietnam | HMPX 3A2A1A0A0B0 |
| Humidity and Temperature Probe | ||
| Humidity and Temperature Probe (HMP3) | ||
| Cable length: HMP3 with 2m cable | ||
| Sensor type: Humicap R2 (VHM180) + Pt100 | ||
| Plastic grid & SST net filter | ||
| Start-up purge off, interval purge off, probe heat off | ||
| Baud rate 19200 | ||
| Parity, data bit, stop bit: Communication settings (8, N, 2) | ||
| Modbus address (240) | ||
| Reserved character | ||
| Probe mounting accessory: Duct Installation Kit | ||
| No connection cable | ||
| 100% Finland Origin | Vaisala Vietnam | Indigo510 A1N2A1AAAN |
| Indigo510 Transmitter | ||
| Transmitter for Indigo Probe with Display | ||
| Power Supply and Output: 11…35VDC / 24VAC | ||
| No Module | ||
| Signal Cable Lead-through: Conduit Fitting | ||
| Probe Cable Lead-through: Cable Gland For Probe | ||
| Probe Cable 1m | ||
| Mounting Plate | ||
| SW Configuration: Standard | ||
| Documentation: Multilingual Quick Guide | ||
| 100% Finland Origin | Vaisala Vietnam | Code: HMT120 HB0AXA12A2C0Z |
| Humidity and Temperature Transmitter | ||
| Output parameters: Humidity output only, HMP110 Stainless Steel Probe | ||
| Transmitter type: 3 m cable for remote probe | ||
| No Display | ||
| Output 4…20mA, 2-wire loop-powered | ||
| Channel 1 Parameter and Custom Scaling | ||
| No Parameter for Output 2 | ||
| Metric Display Units | ||
| Sensor protection: Plastic grid with PTFE filter for HMP110 | ||
| No Transmitter installation | ||
| Installation kit for probe: Duct installation kit (215619) | ||
| Cable bushings: Conduit Fitting NPT 1/2″ | ||
| No PC Accessories | ||
| Operation manual language: Multilingual Manual | ||
| 100% Finland Origin | Vaisala Vietnam | Code: HMT120 KA0A1C12A1C0Z |
| Humidity and Temperature Transmitter | ||
| Output parameters: Humidity and Temperature, HMP110 Stainless Steel Probe | ||
| Transmitter type: Probe mounted on transmitter (HMP110 Stainless Steel Probe) | ||
| No Display | ||
| Output signal: Output 4…20mA, 2-wire loop-powered | ||
| Parameter for Output 1: RH 0…100%RH | ||
| Parameter for Output 2: T -20…+80 °C (-4…176°F) | ||
| Metric Display Units | ||
| Sensor protection: Plastic grid with PTFE filter for HMP110 | ||
| Transmitter installation: No Accessories | ||
| No Installation kit for probe | ||
| Cable bushings: Conduit Fitting NPT 1/2″ | ||
| No PC Accessories | ||
| Operation manual language: Multilingual Manual | ||
| 100% Finland Origin | Vaisala Vietnam | HMW92D |
| Humidity and Temperature Transmitter, 2-wire with Display Cover | ||
| 100% US/EU | Magnetrol Vietnam | A15-AE2A-BKQ |
| Origin | Top mounted displacer switch | |
| NOTE: A15-1E2A-BKQ is our American model code. | ||
| Therefore, we have quoted for our European equivalent instead. Plz recheck before order. | ||
| 100% US/EU | Protectowire Vietnam | CTI-220X |
| Origin | WLM – Sensor cable (CTI-X) Trigger temp. 105°C | |
| Ambient temperature: 79°C, CTI-220X | ||
| – max. length: 1.219m | ||
| – max. ambient temperature: 79°C | ||
| – Delivery incl. installation instructions | ||
| – FM approved | ||
| – cable color gray | ||
| – “X” means higher resistance of the jacket | ||
| 1 roll = 152 m | ||
| 100% US/EU | Protectowire Vietnam | CTM-530 |
| Origin | CTI interface module with display, | |
| Navigation keys, without housing | ||
| Lin. Heat detector CTI (cable) | ||
| – for connection of a signaling/detection line of the CTI sensor cable | ||
| – max. cable length 1.220m | ||
| – 4×20 LED display, illuminated | ||
| – LED indicator for operation, alarm & fault | ||
| – Relay contacts for fault, short circuit & alarm (1A @24V each) | ||
| – 4-20mA outputs for status & alarm point transmission | ||
| – Mounting by 4 mounting holes (distance: 13,97 x 8,89 cm) | ||
| 100% US Origin | Mark-10 Vietnam | Model: MTT03C-100 |
| Cap torque gauge, 100 lbFin / 1150 kgFmm / 1150 Ncm | ||
| 100% Japan Origin | Sinfonia Vietnam | Model: C10-1VF |
| Controller | ||
| 100% Japan Origin | Sinfonia Vietnam | Model: LFG-750 |
| Linear feeder |
Đánh giá (0)
Hãy là người đầu tiên nhận xét “Kho hàng Anh Nghi Sơn Tháng 12/2022”
Sản phẩm tương tự
Thiết bị khác
Thiết bị khác
Đánh giá
Chưa có đánh giá nào.